Home > Hayabusa
Richard Gadson piloting the HTP Prostreet Nitrous Bike featuring some Adams Performance parts.
Sort By:
Page of 1
99-07 Hayabusa Air Shifter Bracket
Our Price: $100.00
Sale Price: $90.00
2008-2016 Suzuki Hayabusa Air Shifter Bracket
Our Price: $100.00
Sale Price: $90.00
Adams Chromoly SwingArm
Our Price: $1,000.00
Billet aluminum bracket that will allow you to mount the air shifter cylinder below the footpeg. The bracket kit is slimmer, lighter, and cheaper than others.

   * Billet Aluminum
   * Easy Bolt-On Installation
   * For Use with Jr. Air Cylinder Only
   * Comes with Drill bit for Air Cylinder  
   * Not for aftermarket rearsets (stock only)
   * Will not work with stock exhaust system
Billet aluminum bracket that will allow you to mount the air shifter cylinder below the footpeg. The bracket kit is slimmer, lighter, and cheaper than others.

   * Billet Aluminum
   * Easy Bolt-On Installation
   * For Use with Jr. Air Cylinder Only
   * Comes with Drill bit for Air Cylinder  
   * Not for aftermarket rearsets (stock only)
   * Will not work with stock exhaust system
Swingarm, Extended, Sportbikes, Chrome Moly - Adams

Adams Performance is proud to offer Chrome Moly Swingarms designed and tested for drag race use.  These lightweight swingarms are used by grudge bikes, dragbikes, and streetbikes and have 4.5" of axle adjustment. (Perfect for those who ride on the street and race or switch classes)

All swingarms are jig welded with no less than 8 contact points.  Bearings have been replaced with brass oil lite bushings that are impregnated with oil to keep weight and cost down while still allowing the arm to pivot smoothly.

Every swingarm is designed for use with stock components and includes a built in air tank, bottle mount bracket, chain guard and brake stay bracket (when required).
Bracket, Rectifier Relocation, Suzuki Hayabusa 08-15 - ADAMS

Remove your rectifier from the heavy stock bracket located under the frame and move it where Suzuki should have put it.

Will this cause the rectifier to overheat? -
Not at all!  The 99-07 Hayabusa had the rectifier in the tail section with no problems.  Current Honda CBR1000RR's have the rectifier under the fuel tank/riders seat (with no air movement at all)  Even some GSXR's have the rectifier right behind the radiator... we all know thats not cold air coming off that.
All new Billet Aluminum Adjustable Lowing Links. Every piece of these links are aluminum. Totally redesigned, Weight saving lowering links. They come in two sizes to fit the Adams Straight Links. You won't believe just how light and strong these things are 'till you have them in your hand!

   * 7075 Billet Aluminum Construction
   * 1.25" of Adjustability
   * 12mm Mounting Holes
   * Lightest on the Market Today!

adjustable from 5.25" - 6.5
All new Billet Aluminum Adjustable Lowing Links. Every piece of these links are aluminum. Totally redesigned, Weight saving lowering links. They come in two sizes to fit the Adams Straight Links. You won't believe just how light and strong these things are 'till you have them in your hand!

   * 7075 Billet Aluminum Construction
   * 1.25" of Adjustability
   * 12mm Mounting Holes
   * Lightest on the Market Today!

adjustable from 7.5" - 8.75"
Lowering Links, Fully Adjustable - ADAMS

All new Billet Aluminum Adjustable Lowing Links. Every piece of these links are aluminum. Totally redesigned, Weight saving lowering links. They come in two sizes to fit the Adams Straight Links. You won't believe just how light and strong these things are 'till you have them in your hand!

   * 7075 Billet Aluminum Construction
   * 1.25" of Adjustability
   * 12mm Mounting Holes
   * Lightest on the Market Today!

adjustable from 7.25 to 8.50
Suspension Arm, Straight Link, Suzuki Hayabusa - ADAMS

   * Constructed from 6061Billet Aluminum
   * Teflon Coated for Smooth Movement (Just use a little grease)
   * Gain Valuable Ground Clearance
   * Shorter Tie Rods (suspension links) are required (ADAM1009 recomended)

Be sure to order the correct link for your bike year.

1999-2005 - 20mm dia. shaft   Part # SL-9905B
2006-2009 - 17mm dia. shaft    Part# SL-0609B
Suspension Arm, Straight Link, Suzuki Hayabusa - ADAMS

   * Constructed from 6061Billet Aluminum
   * Teflon Coated for Smooth Movement (Just use a little grease)
   * Gain Valuable Ground Clearance
   * Shorter Tie Rods (suspension links) are required (ADAM1009 recomended)

Be sure to order the correct link for your bike year.

1999-2005 - 20mm dia. shaft   Part # SL-9905B
2006-2009 - 17mm dia. shaft    Part# SL-0609B
Triple Clamp, Suzuki Hayabusa

Installation
It is basically a simple unbolt and bolt up process. You will need to remove the stock triple clamp cover by removing the top four bolts that hold it down. You will also need to remove the handle bars and reservoirs on both sides to get the clamp cover off. Once you have removed it, install the new unit and tighten the bolts down to factory specs. Now reinstall the components you removed in reverse order.
Triple Clamp, Suzuki Hayabusa Polished 08-2010

Installation
It is basically a simple unbolt and bolt up process. You will need to remove the stock tripleclamp cover by removing the top four bolts that hold it down. You will also need to remove the handle bars and reservoirs on both sides to get theclamp cover off. Once you have removed it, install the new unit and tighten the bolts down to factory specs. Now reinstall the components you removed in reverse order.
K&N’s replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. We make over 1,200 different replacement air filters for virtually every vehicle on the road. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. See applicable instruction sheet for details. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty™ and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED
YT12A-BS BATTERY
Our Price: $99.99
This K&N racing air filter has just two layers of cotton to provide even lower air restriction than our replacement air filter for street vehicles. Unlike K&N replacement air filters, fuel management modifications will be necessary with this racing filter. K&N racing air filters are washable and reusable and come with a one year limited warranty.
SU-1308R
YT12A-BS is the stock replace for you Hayabusa 175 Cold Cranking Amps The Baddest Spray Bar Kit on the market!!!
Dry Nitrous Spray Bar kit for the Gen I and Gen II Suzuki Hayabusa 1999-2016. This Spray Bar allows direct port nitrous injection with jets held at the exit for precise and accurate distribution.
Features:
   * CNC machined from billet 6061 aluminum.
   * Fittings and nozzles incorporated into the spray bar (nothing to loosen up over time!)
   * Bolts to factory mounts.
   * Even distribution to all cylinders.
   * AN metal lines
   * Adams Dual Distribution Block and Mounting Bracket
   *
Lowering Strap
Our Price: $20.00
The Bazzaz Performance Z-Fi Fuel Control Unit differs significantly from
 what is currently available in the marketplace in a number of ways.

It is a plug and play unit that piggy-backs onto the stock ECU.
Each unit comes with an application specific harness that utilizes OEM connectors for simple installation,
and comes pre-programmed for either the stock exhaust or a slip-on.

Please give year, model at checkout
This strap attaches to a brake caliper mount and then over the steering neck, and then back to the other caliper bolt on the other side.
You then "pull" the strap to the desired height and let go.
It basically works just like a motorcycle tie down does, and has a release button to press to put the bike back to the stock height when riding on the street.
Features:

   * Allows you to quickly and safely lower the front of your sportbike in minutes
   * Installs over the steering neck on the frame and attaches to the brake caliper bolts
   * Simple design allows you to lower the front end with ease
   * Approved for all popular race organizations such as AMA, NHRA and MiRock
This Lowering strap Bracket Kit is everything you need to strap your front end!
You then "pull" the strap to the desired height and let go.
It basically works just like a motorcycle tie down does, and has a release button to press to put the bike back to the stock height when riding on the street.
Features:

   * Allows you to quickly and safely lower the front of your sportbike in minutes
   * Installs over the steering neck on the frame and attaches to the brake caliper bolts
   * Simple design allows you to lower the front end with ease
   * Approved for all popular race organizations such as AMA, NHRA and MiRock
Quick Disconnect Terminal by Antigravity
Our Price: $10.00
Sale Price: $7.50
Quick Disconnect Half Harness 6" Antigravity
Our Price: $25.00
Sale Price: $19.00
HAYABUSA ROLLER CAM CHAIN CONVERSION

Now replace the main weak link in the 'busa motor.

Now available from APE is a complete roller cam chain conversion for the Suzuki Hayabusa. For serious racers that can not have cam timing fluctuations and / or the risk of the oem style hy-vo cam chain breaking, this kit is the answer.

The kit contains special upper and lower cam drive sprockets, camshaft adaptors, and cam chain. Another benefit of this setup is that now longer cam chains are available for racers using the longer stroker crankshafts with tall stroker plates.

These kits require modifications to the oem front, back, and top chain guide.
Quick disconnect fitting for adapting a quick disconnect
system to your vehicle comes with neccesary
lugs for attaching to wiring. 6 guage lugs.  
2 pieces needed to complete connection.
This is one half of a Quick Disconnect harness.
By hooking up one this half to another bike
the Antigravity Battery can be switched quickly
from one bike to another...
One end is a Quick Disconnect fitting the other ends
in 4 gauge lugs with 1/4" holes.
Adams Launch Master BUSA
List Price: $210.00
Our Price: $185.00
Busa Grudge Pegs
List Price: $150.00
Our Price: $125.00
Sale Price: $120.00
We have come to understand what a vital roll a clutch plays not only in transferring power
but also in how the engagement and disengagement of the clutch affects the overall feel of the bike.
This friction material has evolved from a simple material that would lock the clutch up when
engaged to many different compounds that will tailor how the clutch reacts in every application.

These are proven in our race bikes, and last!!

Adams Launch Pack work!!
Hayabusa Grudge Pegs

Grudge Style Rear sets For 99-11 Hayabusa
Move foot peg back with 3 hole adjustments
Aluminum
These rear sets have no provision for rear brakes, or shifter.
Oil Pan, Billet, Low Profile, Suzuki Hayabusa
These billet oil pans have a swinging pickup to prevent loss of oil pressure when dragracing.
Designed for turbo or sidewinder exhaust applications, but can be used with some street style exhaust systems that go under the oil pan. (Exhaust modification may be required)
Features:

   Billet Aluminum
   Swinging Pickup
   Uses stock drain plug

*Note - Oil cooler will need to be removed and blocked off
JRI Grudge Shock
Our Price: $729.00
Bolt on Chromoly Swingarm Pegs For all Our Chromoly Swingarms
Note: If You have a Underbraced Swingarm u can only Install towards the front of Swingarm
The JRi GRUDGE shock has established itself as the highest performing shock on the strip for the dollar. Setting the DME Real Street World Record with 11 time National Champion Rickey Gadson on October 4th, 2014 during the MIROCK National with back to back 7.708/7.703 runs at over 190 MPH, the GRUDGE shock will deliver the highest performance for the lowest dollar. GRUDGE shocks are delivered for Street ET, GRUDGE and Real Street applications. JRi can custom valve your GRUDGE shock for Pro STREET and specialized linkage applications. For Most Modern Street/Strip Motorcycles including ZX14, Hayabusa and GSXR1000's. Call for more info on fitment.

Clutch Rod Block Off A must For all Bikes With Slider Clutches bolts on in seconds.
AEM In-Tank 320 LPH High Flow Fuel Pump
List Price: $138.86
Our Price: $129.95
Sale Price: $114.95
AEM In-Tank High Flow 320 LPH E85 Alcohol
List Price: $167.48
Our Price: $149.95
Sale Price: $134.50
AEM’s High Flow In-Tank Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps.

The AEM High Flow In-Tank Fuel Pump (PN 50-1000) flows 320 lph (84 gph) at 43 PSI and is capable of supporting over 1,000 HP at 43 PSI.

Kit includes fuel pump, rubber sleeve and end caps, pre filter, hose, clamps and flying lead.

* Power rating given at 43 PSI, 13.5v at the pump with a BSFC of .5. Flow capability for horsepower support is ultimately dependent on fuel hose diameter, and system electrical voltage and amperage capabilities.
** Pump installation requires slight modifications to the stock fuel pump sending unit for installation.

Works for Hayabusa 01-12, GSXR1000 01-Up and many more. Contact Us for application on other models.
The AEM E85 Fuel Pump is designed for in-tank installation on high performance naturally aspirated and forced induction vehicles. It flows 320 lph (84 gph) at 43 PSI (please refer to the chart for fuel pump horsepower versus pressure for various applications and fuel types).

AEM’s E85 Fuel Pump features robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels, and has been tested to work with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline.

The AEM E85 Fuel Pump features a compact 39mm diameter that fits most applications. It features a large center inlet design that eases installation and includes a wiring harness, pre filter, internal fuel hose and clamps. Every AEM E85 Fuel Pump is tested to flow 320 lph at 43 PSI before it is packaged for sale.

Hayabusa Aluminum Prostreet Subframe

   * Fits 99-UP Hayabusa

Features:

   * Tig welded in fixture
   * All aluminum construction
   * Black plastic back panel
   * Includes Dzus springs.
Dynojet Power Commander 5 Hayabusa 1999-2000
List Price: $379.95
Our Price: $329.95
Sale Price: $329.95
Dynojet Power Commander 5 Hayabusa 2001-2007
List Price: $379.95
Our Price: $329.95
Sale Price: $329.95
This is the one that everyone copies and wants to be like, this is where the adjustable swingarm
All prices are to modify YOUR stock swingarm or to exchange for an in-stock swingarm.
To eliminate down time we offer an exchange program for a core charge of 150.00.
Once you receive your arm, you send back your undamaged stock arm to recieve a refund of your core charge.
The base price also includes an extended brakebar or brake holder when needed.
Swingarms that are not in stock for exchange may take 2-3 weeks to complete depending on swingarm finish and work load
For Suzuki Hayabusa 1999-2000 P/N#1020-2114
The Dynojet Power Commander plugs inline with your bike’s stock fuel injection system. It uses OEM (original equipment manufacturer) style connectors making installation easy and quick. The Power Commander allows a full range of fuel adjustments via fuel maps. Adjustments can be made with a Windows based computer. No permanent changes are made to the bike’s system. Once the unit is removed the bike reverts to its stock settings.
Map Database
Dynojet supports the Power Commander product line with the worlds largest map database. We work with all of the leading exhaust manufacturers from around the globe to bring you pre-tested settings for your motorcycle. No guesswork on your part. Every map that we offer was tested and developed on one of our multiple in house Dynojet Dynamometers using our patented Tuning Link software. New maps are developed weekly for all popular applications.
For Suzuki Hayabusa 2002-2007 P/N#1020-1399
The Dynojet Power Commander plugs inline with your bike’s stock fuel injection system. It uses OEM (original equipment manufacturer) style connectors making installation easy and quick. The Power Commander allows a full range of fuel adjustments via fuel maps. Adjustments can be made with a Windows based computer. No permanent changes are made to the bike’s system. Once the unit is removed the bike reverts to its stock settings.
Map Database
Dynojet supports the Power Commander product line with the worlds largest map database. We work with all of the leading exhaust manufacturers from around the globe to bring you pre-tested settings for your motorcycle. No guesswork on your part. Every map that we offer was tested and developed on one of our multiple in house Dynojet Dynamometers using our patented Tuning Link software. New maps are developed weekly for all popular applications.
Dynojet Power Commander 5 Hayabusa 2008-2015
List Price: $379.95
Our Price: $329.95
Sale Price: $329.95
Lowering Strap Brackets
Our Price: $75.00
For Suzuki Hayabusa 2008-2015 P/N#1020-0852
The Dynojet Power Commander plugs inline with your bike’s stock fuel injection system. It uses OEM (original equipment manufacturer) style connectors making installation easy and quick. The Power Commander allows a full range of fuel adjustments via fuel maps. Adjustments can be made with a Windows based computer. No permanent changes are made to the bike’s system. Once the unit is removed the bike reverts to its stock settings.
Map Database
Dynojet supports the Power Commander product line with the worlds largest map database. We work with all of the leading exhaust manufacturers from around the globe to bring you pre-tested settings for your motorcycle. No guesswork on your part. Every map that we offer was tested and developed on one of our multiple in house Dynojet Dynamometers using our patented Tuning Link software. New maps are developed weekly for all popular applications.
Lowering Strap Bracket, Radially Mounted Brake Calipers (Pair)
These are the brackets that you have to use with
Radially Mounted Brake Calipers to attach the front end lowering straps.
These are sold by the pair one for each fork tube.
Feature:
#Multiply Hole design to allow you to have the strap where you want it!!!
# CNC Machined from billet 6061-T6 Aluminum
# Black Anodized

BST Carbon Fiber Front 3.5 x 17 Hayabusa (99-07) GSX-R750 (96-99) GSX-R600 (97-03)

Wheels come with steel bearings for Ceramics please call for Pricing.

Weighing between 40 and 60 percent less than OEM wheels, BST wheels bestow sportbikes with sharper corner-carving abilities, faster acceleration, and quicker braking by weighing less than their production-bike counterparts. Lighter wheels are also easier for suspension systems to control over bumps and irregular surfaces, yielding more traction and unimpeded acceleration. Less rotating mass also equals less rider fatigue.

A lighter rear wheel is easier for the shock to control properly, which leads to superior power application and much higher trap speeds in competition and track days.

BST Carbon Fiber Front 3.5 x 17 Hayabusa (08-12) B-King (08-12)

Wheels come with steel bearings for Ceramics please call for Pricing.

Weighing between 40 and 60 percent less than OEM wheels, BST wheels bestow sportbikes with sharper corner-carving abilities, faster acceleration, and quicker braking by weighing less than their production-bike counterparts. Lighter wheels are also easier for suspension systems to control over bumps and irregular surfaces, yielding more traction and unimpeded acceleration. Less rotating mass also equals less rider fatigue.

A lighter rear wheel is easier for the shock to control properly, which leads to superior power application and much higher trap speeds in competition and track days.

BST Carbon Fiber Front 3.5 x 17 Hayabusa (13-14) w/ ABS

Wheels come with steel bearings for Ceramics please call for Pricing.

Weighing between 40 and 60 percent less than OEM wheels, BST wheels bestow sportbikes with sharper corner-carving abilities, faster acceleration, and quicker braking by weighing less than their production-bike counterparts. Lighter wheels are also easier for suspension systems to control over bumps and irregular surfaces, yielding more traction and unimpeded acceleration. Less rotating mass also equals less rider fatigue.

A lighter rear wheel is easier for the shock to control properly, which leads to superior power application and much higher trap speeds in competition and track days.

BST Carbon Fiber Rear 6 x 17 Hayabusa (99-07)

Wheels come with steel bearings for Ceramics please call for Pricing.

Weighing between 40 and 60 percent less than OEM wheels, BST wheels bestow sportbikes with sharper corner-carving abilities, faster acceleration, and quicker braking by weighing less than their production-bike counterparts. Lighter wheels are also easier for suspension systems to control over bumps and irregular surfaces, yielding more traction and unimpeded acceleration. Less rotating mass also equals less rider fatigue.

A lighter rear wheel is easier for the shock to control properly, which leads to superior power application and much higher trap speeds in competition and track days.

BST Carbon Fiber Rear 6 x 17 Hayabusa (08-12)

Wheels come with steel bearings for Ceramics please call for Pricing.

Weighing between 40 and 60 percent less than OEM wheels, BST wheels bestow sportbikes with sharper corner-carving abilities, faster acceleration, and quicker braking by weighing less than their production-bike counterparts. Lighter wheels are also easier for suspension systems to control over bumps and irregular surfaces, yielding more traction and unimpeded acceleration. Less rotating mass also equals less rider fatigue.

A lighter rear wheel is easier for the shock to control properly, which leads to superior power application and much higher trap speeds in competition and track days.

BST Carbon Fiber Rear 6 x 17 Hayabusa (13-14) w/ ABS

Wheels come with steel bearings for Ceramics please call for Pricing.

Weighing between 40 and 60 percent less than OEM wheels, BST wheels bestow sportbikes with sharper corner-carving abilities, faster acceleration, and quicker braking by weighing less than their production-bike counterparts. Lighter wheels are also easier for suspension systems to control over bumps and irregular surfaces, yielding more traction and unimpeded acceleration. Less rotating mass also equals less rider fatigue.

A lighter rear wheel is easier for the shock to control properly, which leads to superior power application and much higher trap speeds in competition and track days.

BST Carbon Fiber Rear 6.25 x 17 Hayabusa (99-07)

Wheels come with steel bearings for Ceramics please call for Pricing.

Weighing between 40 and 60 percent less than OEM wheels, BST wheels bestow sportbikes with sharper corner-carving abilities, faster acceleration, and quicker braking by weighing less than their production-bike counterparts. Lighter wheels are also easier for suspension systems to control over bumps and irregular surfaces, yielding more traction and unimpeded acceleration. Less rotating mass also equals less rider fatigue.

A lighter rear wheel is easier for the shock to control properly, which leads to superior power application and much higher trap speeds in competition and track days.

BST Carbon Fiber Rear 6.25 x 17 Hayabusa (08-12)

Wheels come with steel bearings for Ceramics please call for Pricing.

Weighing between 40 and 60 percent less than OEM wheels, BST wheels bestow sportbikes with sharper corner-carving abilities, faster acceleration, and quicker braking by weighing less than their production-bike counterparts. Lighter wheels are also easier for suspension systems to control over bumps and irregular surfaces, yielding more traction and unimpeded acceleration. Less rotating mass also equals less rider fatigue.

A lighter rear wheel is easier for the shock to control properly, which leads to superior power application and much higher trap speeds in competition and track days.

BST Carbon Fiber Rear R Series 6.625 x 17 Hayabusa (08-12)

Wheels come with steel bearings for Ceramics please call for Pricing.

Weighing between 40 and 60 percent less than OEM wheels, BST wheels bestow sportbikes with sharper corner-carving abilities, faster acceleration, and quicker braking by weighing less than their production-bike counterparts. Lighter wheels are also easier for suspension systems to control over bumps and irregular surfaces, yielding more traction and unimpeded acceleration. Less rotating mass also equals less rider fatigue.

A lighter rear wheel is easier for the shock to control properly, which leads to superior power application and much higher trap speeds in competition and track days.

BST Carbon Fiber Rear R Series 6.625 x 17 Hayabusa (99-07)

Wheels come with steel bearings for Ceramics please call for Pricing.

Weighing between 40 and 60 percent less than OEM wheels, BST wheels bestow sportbikes with sharper corner-carving abilities, faster acceleration, and quicker braking by weighing less than their production-bike counterparts. Lighter wheels are also easier for suspension systems to control over bumps and irregular surfaces, yielding more traction and unimpeded acceleration. Less rotating mass also equals less rider fatigue.

A lighter rear wheel is easier for the shock to control properly, which leads to superior power application and much higher trap speeds in competition and track days.

JRI Pro Street Shock
Our Price: $899.00

The JRi PRO STREET shock provides precise action for both Pro Street and Grudge/Extended lenth chassis. With simple adjustments, racers can put their Pro-Street or Grudge bike in the winners circle at any level of competition. PRO STREET shocks are delivered for Pro Street, Grudge and Street ET applications. JRi Shocks offers custom valve solutions for Real Street applications.

Contact us here at Adams for more info on the JRi PRO STREET drag shock or to place an order.